Clean-State.com » Painting Contractor http://clean-state.com Tue, 06 Dec 2011 18:00:15 +0000 en hourly 1 House Painting http://clean-state.com/house-painting http://clean-state.com/house-painting#comments Fri, 04 Feb 2011 22:29:40 +0000 admin http://clean-state.com/?p=386 This is another clients home who wanted House Painting. It was a new resale purchase and we painted the whole house, except for some ceilings.  Very nice townhouse and first step is painting ceilings, patching walls, then spot priming after sanding. Most of the time there is no need to prime walls. In the paint store they usually tell you that you need it but if your using a top line paint they are usually 100% Acrylic and that will stick very well as long as your walls are not dusty or greasy.  Wash any walls if they are greasy (kitchen areas) you could use tsp.

Then we painted 2 coats on the walls and the trim got 1 good coat here. If the trim is already white most of the time we can finish it nicely with 1 good coat.  I don’t have any before photo’s on this one. If your not up to the job of painting yourself, give us a call we’ll be glad to give you a free estimate on your House Painting. 519-721-1695

House Painting Stairway

House Painting Stairway

House Painting Hall

House Painting Hall

House Painting Kitchen

House Painting Kitchen

]]> http://clean-state.com/house-painting/feed 0 Industrial Painting Contractor http://clean-state.com/industrial-painting-contractor http://clean-state.com/industrial-painting-contractor#comments Sun, 02 May 2010 20:47:04 +0000 admin http://clean-state.com/?p=345
Industrial Painting
Industrial Painting

Looking for an Industrial Painting Contractor? Clean-State has been in business for 20 years. We have completed sucessfully many projects for Industrial Painting. Painting Insustrial Structures can require a lot of cleaning before the painting can begin. Sometimes years of Lubricating oils or dust have accumulated on surfaces which are needing painting.  First we need to identify the surfaces to be painted and the best method of providing a good base where paint will adhere properly and give you a paint job that will last for years.

There are a number of different ways to remove dust, oil and grease being
  • 1 Light Cleaning of Dust
  • 2 Pressure Washing
  • 3 Sand Blasting
  • 4 Dry Ice Blasting
  • 5 Water Blasting

 

We can provide Pressure Washing and Light Industrial Cleaning. Next Priming could be needed, and then the final coating procedure. Also in Industrial Painting Scissor lifts or Boom lifts are used and Clean-State has the required tickets for opperating the machines as well as the saftey gear needed. So if your needing an Industrial Painting Contractor to Paint the interior or exterior of your plant give us a call: 519-721-1695

]]> http://clean-state.com/industrial-painting-contractor/feed 6